The Starter Tethering Kit from Tether Tools gives you all the essential gear needed to create a secure data connection between your camera and computer for a tethered workflow. This kit comes with a orange USB 3.0 cable that is equipped with a Type-C male connector on one end and a USB micro-B 10-pin male connector on the other side, making it compatible with external hard drives, memory card readers, and more. This USB 3.0 cable is 15′ long and transmits data at a rate of up to 5 Gb/s. Additionally, the USB 3.0 micro-B connector has a right-angle design that routes the cable along the device.
Tether Tools includes two JerkStoppers that remove the strain placed on the computer and camera’s ports from the connecting cable and help ensure the cable stays connected. For preventing tangles, ten ProTab cable ties keep the power, video, and other types of cables well managed and organized. In addition, this kit provides a Tether Tools organization case, so you can store the included cable, cable retention devices, and cable ties.
Please note that only the USB cable is covered by a limited 90-day warranty that does not guard against wear and tear.
Tether Tools TetherPro USB Type-C Male to Micro-USB 3.0 Type B Male Cable (15′, Orange, Right-Angle)
With this orange, 15 ft long Tether Tools TetherPro USB Type-C Male to Micro-USB 3.0 Type B Male Cable, you can connect a camera, smartphone, or other USB Type-C device to a computer, for the purposes of transferring data. This cable supports USB 3.0 for data transfer rates of up to 5 Gb/s. This cable also features a right angle connector, which is designed to help alleviate stress on the cable connector.
If you connect a camera to a laptop and your camera is compatible with tethering, you can use this cable to help increase productivity during photo shoots. Rather than proof images on your camera’s small LCD, they are sent directly to a notebook’s larger, hi-res display. Seeing images in this way helps to review them for slight imperfections that you may have otherwise missed.
To help enhance performance, this cable is fully shielded and plated to help minimize signal interference. Please Note: this cable is designed to be used for data transfer only, and not for charging devices.
Tether Tools JerkStopper Camera Support
The JerkStopper Camera Support, exclusively from Tether Tools, is the complete tethered setup that secures the cables of your camera. This kit will remove all the stress and strain placed on the cable or cord to ensure it stays plugged in and prevents cable or equipment damage. The patented JerkStopper cable retention device provides slack to cables in order to prevent accidental dislodging. This kit can be used with any standard A/C power adapter cord, flash sync cord, HDMI, USB or FireWire cable. It supports cable diameters from 3.5mm to 8.5mm.
JerkStopper Camera Support
Tether Tools JerkStopper Computer Support (USB Port)
The JerkStopper Computer Support (USB Port), exclusively from Tether Tools, allows you to create a complete tethered setup when used with a Tether Tools Camera Support (sold separately) to secure the cables of both your computer and camera. This JerkStopper Computer Support will remove all the stress and strain placed on the cable or cord to ensure that it stays plugged in and prevents cable or equipment damage.
This particular computer support model uses a spare USB port as an anchor point by allowing slack in the cord in order to prevent damage or dislodging. This kit can be used with any standard A/C power adapter cord, flash sync cord, HDMI, USB or FireWire cable. It supports cable diameters from 3.5mm to 8.5mm.
This JerkStopper Computer Support is a versatile and inexpensive tool that could potentially save you hundreds if not thousands of dollars in preventative damage. Offered at an affordable price, you will find this JerkStopper Computer Support an invaluable resource on all your tethered photo shoots.
JerkStopper Computer Support (USB Port)
Tether Tools Cable Organization Case (Standard)
The Cable Organization Case (Standard) from Tether Tools is an easily accessible, durable storage case for all of your tethering cables, straps and cable retention devices. The standard case design is ideal to store cables and additional accessories. If you are transporting or storing cables less than 20′ / 6m this case is ideal.
Features include a clear front window that enables quick and easy access to exactly what you need. Keeping all of your tethering gear together, the TetherPro Cable Case fits nicely inside your Tether Table storage bag.
Tether Tools JerkStopper ProTab Cable Ties (Small, Set of 10)
The JerkStopper ProTab Cable Ties from TetherTools are a 10-pack of the small-sized ties and are designed for keeping thin- to medium-gauge cables and cords such as A/C, USB, HDMI and music cables up to about 15′ (4.6m) in length organized and well maintained. This can help to increase the cable’s lifespan. The JerkStopper ProTab Cable Ties also save time trying to locate or untangle mismanaged cords.
The integrated ProTab attaches the cable tie to the cable so it stays on the cable and does not get misplaced or lost. If desired, the ProTab can be opened and the tie can be removed from the cable and reused at anytime.
The JerkStopper ProTab Cable Ties have a guaranteed life span of 10,000 applications per tie.
There are no reviews yet.